What is a Nebulizer Mask?
2024-11-14
The Nebulizer mask is mainly composed of an interface and a mask body. The materials that make up the mask include plastics, etc. It is used to connect the atomizing device for atomization. This product uses high-quality medical PP material, which has small residue and effectively reduces odor; the adjustable atomizing cup allows users to adjust the upper atomizing cover according to their own situation and select different atomizing speeds.
Contents
1. Introduction to Nebulizer mask
2. Indications for Nebulizer mask
3. Principle of Nebulizer mask
4. Characteristics of Nebulizer mask
5. Advantages of Nebulizer mask
7. Precautions for Nebulizer mask
Introduction to Nebulizer mask
Nebulizer mask is an oxygen mask. Atomization and oxygen inhalation are both common clinical treatment methods. Oxygen inhalation masks inhale oxygen into the body, and Nebulizer masks are used to inhale external drugs into the body.
Indications for Nebulizer mask
1. Respiratory diseases: Nebulizer masks are commonly used to treat respiratory diseases such as respiratory infections, asthma, chronic bronchitis, and pneumonia. It converts drugs into tiny particles, allowing them to better reach the deep respiratory tract and improve their efficacy.
2. Use of bronchodilators: Nebulizer masks are often used to administer bronchodilators, which can help relax muscles, dilate bronchi, and improve symptoms of dyspnea and asthma.
3. Sputum discharge: Nebulizer masks are also often used to assist in sputum discharge, especially for patients with difficult sputum coughing. Nebulizers or viscous sputum dissolving agents can help sputum cough more easily.
Principle of Nebulizer Mask
1. Liquid drug delivery: The nebulizer mask is equipped with a liquid drug reservoir or cup to place the drug in it. Liquid drugs can be respiratory drugs, such as bronchodilators, inhaled hormones or antibiotics.
2. Compressed gas supply: The nebulizer mask is equipped with a compressed gas supply system, usually using compressed air or oxygen. Compressed gas enters the nebulizer through a pipe or pipeline.
3. Nebulizer components: The nebulizer in the nebulizer mask is a key component used to convert liquid drugs into tiny aerosolized particles. Usually, the nebulizer mask uses ultrasound or air pressure to produce a vibration or spray effect to disperse the liquid medicine into small particles.
4. Inhalation process: The patient wears the nebulizer mask on the mouth and nose. When the patient breathes, the nebulized drug particles enter the respiratory tract through the airflow provided by the mask. These fine particles can enter the lungs through the mouth and nose and be absorbed by the lung tissue.
Features of nebulizer mask
1. The inhaled drug can directly reach the respiratory tract and lungs of the diseased area, so it is faster and more effective than oral drugs.
2. Since the drug enters the respiratory tract directly, its dosage is only one-tenth of other drug administration methods at most, which significantly reduces the toxic side effects of the drug, which is especially important for children and the elderly.
3. It can humidify the airway and dilute sputum, and can be widely used for various respiratory diseases.
4. For some diseases that are mainly caused by viral infections and can heal themselves (such as colds), nebulizer inhalation treatment can significantly alleviate symptoms and shorten the course of the disease.
5. The drug has a direct effect, which is effective and rapid in relieving bronchial asthma, and is superior to other treatment methods; it can even save the patient's life in critical moments.
Advantages of Nebulizer mask
1. High-efficiency oil-free piston compressor, no need for cooling water during atomization, daily maintenance-free, simpler and more convenient operation; original drug atomization, no need for dilution, good clinical effect; almost no drug residue, high drug utilization rate.
2. More convenient to operate and use, the product is equipped with a 2-meter trachea, with large room for movement, can be used while sitting or lying, and the atomizer component is light and easy to wear and hold.
3. The atomization uses the original drug atomization, and the atomization amount inhaled during the relative treatment time is appropriate, which is not easy to cause swelling of the tracheal wall mucosa and cause tracheal obstruction. The atomized particles are ultra-fine and not easy to collide and combine. The human body is comfortable to inhale, and can enter the bronchi, lungs and other trachea. The clinical effect is excellent, especially suitable for the treatment of lower respiratory tract diseases.
4. Purely mechanical products, with extremely low failure rate, low maintenance cost, long service life, generally 5 to 10 years of normal use.
How to use the Nebulizer mask
1. Unpack the product and take it out of the bag, connect the atomizer cup, airway tube, and inhalation accessories.
2. Unscrew the middle cover of the atomizer cup, add a limited amount of liquid medicine according to the doctor's instructions, and then install the middle cover.
3. Connect the compressor to the power supply, turn on the switch and run it at no load for 1 minute, turn off the switch, and then connect the other end of the airway tube to the air outlet of the compressed atomizer host.
4. Cover the mask on the mouth and nose or hold the mouthpiece in the mouth according to the use requirements, then turn on the power supply, exhale and inhale slowly, and repeat this step until the liquid medicine is atomized.
5. After the atomization is completed, turn off the switch, unplug the airway tube from the emergency outlet, and tidy up the atomizer device for proper disposal.
Precautions for Nebulizer masks
1. Choose a suitable Nebulizer mask: Choose a suitable Nebulizer mask according to your needs to ensure that it can effectively block particles and liquid splashes and provide adequate protection.
2. Wear the mask correctly: Make sure that the mask completely covers the mouth and nose, has moderate tightness, and can fit closely to the face to prevent pollutants from entering the respiratory tract.
3. Pay attention to breathing when wearing for a long time: Wearing an Nebulizer mask for a long time may cause some discomfort, so keep breathing normally to avoid discomfort caused by excessive breathing or long-term breathing of carbon dioxide.
4. Replace the mask regularly: According to the instructions for use, replace the mask or filter regularly to avoid using expired or damaged masks to reduce the protective effect.
5. Clean and disinfect the mask correctly: Before and after use, please clean and disinfect the mask correctly to avoid cross infection.
6. Follow the instructions for use: Strictly follow the instructions for use, wear and adjust the mask correctly according to the correct steps to ensure its effective protection.
7. Pay attention to storage and maintenance: Store and maintain the mask correctly to avoid moisture or damage to ensure its normal use and protective effect.
